Patcher®is a polymer ceramic composite compound incorporating an advanced proprietary blend of ceramic and Kevlar® additives with an epoxy resin. Designed to achieve maximum build and strength to repair, fill, create, reface, bond or cold weld metal surfaces. This is a two-part system, 100% solids, solvent free, zero VOCs technology. Patcher is a fast curing paste designed to be applied by trowel or flexible spreader.
Features
- Made with Kevlar by Dupont for superior strength
- Easy 1:1 mix ratio
- Solvent free with zero VOCs
- Requires minimum surface preparation
- Can be used as a coating or adhesive
- Allows for cold bonding of plates
- Will cure under water
- Bonds to cast iron, steel, glass, ceramic, aluminium, copper and concrete
| Technical data | |
|---|---|
| Dry to touch time at 77°F (25°C) |
2.5 hours
|
| Sag Resistance | no sag at 250 mils |
| Pot Life |
15 minutes
|
| Mix ratio | 1:1 |
| Cure to machine | 12 hours |
| Substrate | steel, stainless steel, chromalloy, various alloys, ceramic |
Patcher – Metal [FMP’s ORIGINAL metal repair paste]
Kevlar modified Patcher for extreme strength and durability. Fast set and suitable for most substrate materials
Patcher – Metal HT [higher temperature metal repair]
Patcher – Metal HT is for higher temperature immersion and dry service
Patcher – Marine [red repair compound for marine service]
Designed for marine service as a pit repair filler for new ship building, maintenance and on board repairs. It’s underwater and wet cure ability makes it ideal for splash zone repairs
Patcher – Wood [for the repair and bonding of wood]
Versatile wood repair compound to repair rotted, worn wood. Patcher – Wood uses real wood fiber and it is easily sanded and paintable. Suitable for underwater and wet wood repairs
Applications
- Flanges
- Pumps
- Tube Sheets
- Damaged Castings
- Shafts
- Tank repair
- Pit repair
- Hole repair
How to Guide
Repair to Damaged Metal
How to – Damaged Metal Repair
Cold Plate Bonding –
How to – Plate Bonding